Howard miller grandfather clock repair +3 step are elegant timepieces that are built to last. But even the best clocks will experience some glitches over the years. If your grandfather’s clock is suddenly out of tune or the pendulum isn’t working as it should, here are a few tips for troubleshooting your Howard Miller clock.
When the Pendulum Doesn’t Work Properly
Pull up the weights and check that they are correctly positioned. When you look at the clock, the heaviest weight should be on the right. If they are properly placed, look at the hour and minute hands on the clock to make sure they are not touching. Often times, this can be the reason why your clock repairs near me stops working.
If they are touching, you can carefully recalibrate them by moving the hand in the direction of the dial without touching it. If that didn’t change their position enough, you can also move the minute hands. Just be careful and avoid touching the dial during this process.
Alternatively, there could be several other reasons why the pendulum stopped. Check that the hour hands are touching the glass pane. If so, tilt it back with enough space between it and the windshield.
If the hands are in a good position, double-check that your clock is level with the ground. Some Howard Miller clocks will not work properly if they are not perfectly flat on the ground.
Grandfather Clock Bells Off
There are many reasons why your clock’s melody may sound unusual. In most cases, you can just set the time and then the clock will run and go back to sorting. If this is not the case with your clock, you will likely need to reposition the minute hand. To do this, move it every 15 minutes until the clock strikes. Then unscrew the minute hand and reposition it to show the hour. Put it back in and see if it works.
Grandfather Clock Clear
howard miller grandfather clock repair can collect large amounts of dust and debris that can affect their ability to function properly. Regular cleaning and maintenance can help it run longer without any issues. We recommend that you wind the clock every 8 days, use a special polish and wax when cleaning your home, and keep the clocks cover closed and locked to prevent dirt and dust from entering.
Frankenmuth Clock Company takes care of all your clock related needs, including repair and maintenance of Howard Miller Clocks. Contact us today to find out more.
